The secret to house washing for stone & stone veneer is using the right method, not the most pressure. In Eden Prairie, MN, we match the cleaner and pressure to the surface so it comes out clean without damage. With stone & stone veneer, the right approach is low-pressure wash.
The right method for the job
Cleaning solution: A pH-appropriate stone cleaner or soft wash, tested on a small area first.
What to know about cleaning stone & stone veneer
Natural stone and manufactured stone veneer vary a lot. Manufactured veneer is cast concrete with a colored surface that high pressure can wear off, and limestone and sandstone are softer than granite.
Avoid: High pressure on manufactured veneer, and acidic cleaners on limestone, marble and other calcium-based stone.
How often: Every 2-3 years.
Signs you need house washing for stone & stone veneer
- Green or black film on the shaded sides of the house
- Dirt splash along the bottom of the walls
- Cobwebs and wasp nests under the eaves
- Chalky or dull-looking siding
- You're planning to paint, sell or list a rental
Where the grime comes from
- Mildew and algae in shade and humidity
- Rain splashing soil onto the bottom courses
- Pollen, dust and road grime
- Spiders and insects under the soffits
Easy upkeep between cleanings
- Rinse small areas with a garden hose and a soft brush on an extension pole
- Use a mild detergent made for siding, not household bleach straight from the bottle
- Clear plants and furniture away from walls before a wash
- Look for loose siding, open seams or damaged caulk before anyone washes the house
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Water driven under siding laps and into wall cavities
- Broken window seals and water inside the house
- Stripped paint, raised wood grain or etched stucco from high pressure
- Ladder falls while spraying
How we handle house washing for stone & stone veneer
- Walk the house and point out problem areas or damage
- Cover outlets, lights and fixtures, and pre-wet landscaping
- Apply a soft wash solution from the bottom up
- Rinse from the top down at low pressure, including eaves and soffits
- Rinse plants, check windows and walk the house with you
Typical house washing for stone & stone veneer prices
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for stone & stone veneer
- Soft Washing for Stone & Stone Veneer
- Graffiti Removal for Stone & Stone Veneer
- Efflorescence Removal for Stone & Stone Veneer
- Commercial Pressure Washing for Stone & Stone Veneer
House Washing for Stone & Stone Veneer in Eden Prairie, MN
In Minnesota, snow and slush that sit against the house leave a band of grime and mildew along the lower siding, and shaded north walls stay damp long after the thaw. A spring soft wash removes winter grime before it bakes on over the summer.
Much of Minnesota has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.
Besides Eden Prairie (ZIP codes 55344, 55346 and 55347), we handle house washing for stone & stone veneer in Chanhassen (3 mi), Minnetonka (4.4 mi), Shakopee (4.8 mi) and Hopkins (4.9 mi). Call (555) 010-0000 for a free quote in Eden Prairie.
House Washing for Stone & Stone Veneer: frequently asked questions
How much does house washing for stone & stone veneer cost in Eden Prairie, MN?
House Washing for Stone & Stone Veneer typically costs $300-$700 for a typical 1,500-2,500 sq ft home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for house washing for stone & stone veneer?
For stone & stone veneer: soft wash for veneer; up to about 1,500 PSI on solid natural stone, depending on the stone. What we avoid: high pressure on manufactured veneer, and acidic cleaners on limestone, marble and other calcium-based stone. The cleaning solution does most of the work, followed by a gentle rinse.
Is house washing for stone & stone veneer safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule house washing for stone & stone veneer?
Every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.